
DESCRIPTION :
An acrylic waterproofing compound formulated for maximum weather resistance and low water penetration.AREA OF USE.
Suitable for all types of roofs, parapet walls, general leaks, bridging cracks and flashings.APPLICATION :
May be applied with brush and roller. Do not apply at temperatures lower than 15 degrees C. TO MAKE PENETRATING SEALER MIX COMPOUND 1:1 WITH WATER.CAUTION :
Do not force at temperatures higher than 40 degrees c. since solvent blister will result in loss of gloss. It is advisable to apply on any surface with internal temperature not below 15 degrees Celsius and not exceeding 40 degrees .TOP COATS
Any good quality acrylic.TECHNICAL DATA | |||
VISCOSITY KREBB STORMER | : | 105 – 120KU + | |
VISCOSITY FORD CUP NO 4 | : | na | |
SPECIFIC GRAVITY | : | 1.2 KG PER LT | |
HIDING POWER | : | NA | |
SURFACE DRYING | : | 1 HOUR | |
HARD DRYING | : | 2 HOURS | |
RESIN TYPE | : | ||
SOLVENT | : | NONE | |
WET ABRASION RESISTANCE | : | + 10 000 | |
OVERSPRAY TIME | : | 30 min | |
SAG INDEX ON APPLICATION | : | Initial @ 150 micron wet film thickness | |
ADHESION CROSS HATCH | : | 0% | |
NON VOLATILE CONTENT | : | 45% | |
CONTRAST OF RATIO | : | 0,6 | |
REFLECTANCE | : | 0,7 | |
SHELF LIFE | : | 1 year MAXIMUM | |
SALT SPRAY | : | 100 HOURS | |
SALT DIP AFTER INDENTATION | : | 30 HOURS | |
ELONGATION 10 MM | : | 200 MM | |
METHOD OF REMOVAL | : | Burn with open flame | |
FLASHPOINT | : | NA | |
p.H | : | 9 TO 10 | |


Contact us today!
Address: 30 Surprise Road, Lock Up Storage Unit 291, Maxmead, Pinetown KZN 3610
Cell : 078 942 9429
Whatsapp : 078 942 9429
Email: info@crediseal.co.za